1995 Yamaha Virago 1100 Carburetor Cleaning, Removal, Rebuild
Cleaning a carburetor is a must, moreover the old bike like Yamaha Virago 1100 1995. i'm just working on my buddies 1995 yamaha virago 1100. he parked this bike last winter or this winter ,I guess and put gas in it and started it up just the other day spring here and it started to puke gas out vent on the side of the carburetor and proceeded to light on fire so the bikes burning up and needed some help.
 |
| 1995 Yamaha Virago 1100 Carburetor Cleaning, Removal, Rebuild |
I've pulled out the carbs and I found that the one of the carbs was very very gelled up here inside the the bowl I've already gone and removed the both the bowls and cleaned up inside. I guess I probably should have made a video of that but simple enough there's four bolts one two three and four but first you have to remove this linkage plate.
there's one two three four bolts there it comes off back way like this and you can take these two bowls off and anyways inside there's a float in the needle and they were all gelled up from sitting all all winter with a little bit of fuel side. so I clean them out put them all back together.
there's one two three four bolts there it comes off back way like this and you can take these two bowls off and anyways inside there's a float in the needle and they were all gelled up from sitting all all winter with a little bit of fuel side. so I clean them out put them all back together.
I just wanted to show you how to remove these you've got two boots one boot sits right there and the other boot sits right there now you'll notice that the one bolt and keeper is still sitting on the top and same thing on the other side there's a bolt and a keeper right there these boots there's one have a slotted a slotted mount on one side and a voltage mount on the other.
so all i I have to do is remove the bottom bolt that one and these things pop in snap into place and you just tighten the one bolt and snug down the top bolt when you go to pull out and install these carburetors it's actually really easy it took about 15 minutes to get a disconnect a note probably ten minutes put it back together and we'll be back in there running.